[vpn-help] Shrew 2.17 on Ubuntu 12.04.2 LTS established with Juniper SSG20 but can ping nowhere

Kevin VPN kvpn at live.com
Thu Apr 18 22:06:57 CDT 2013


On 04/18/2013 03:04 AM, eric xu wrote:
> Hi All,
>
> As a new user I run into problem as described briefly in caption. More details is as follows:
>
> - Shrew Version: 2.17 complied on Ubuntu 12.04.2 LTS 32-bit (IBM T41)
> - Gateway: Juniper SSG20 Version: 6.2.0r5.0 (Firewall+VPN)
> - qikea shows "Established"
> - tap0 created but can ping nowhere into the private network (192.168.11.0/24)
>
> Ifconfig:
> eth0      Link encap:Ethernet  HWaddr 00:0d:60:b2:ac:27
>            UP BROADCAST MULTICAST  MTU:1500  Metric:1
>            RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>            TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>            collisions:0 txqueuelen:1000
>            RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
>
> eth1      Link encap:Ethernet  HWaddr 00:0c:f1:40:6e:73
>            inet addr:117.128.171.xxx  Bcast:117.128.171.63  Mask:255.255.255.192
>            inet6 addr: fe80::20c:f1ff:fe40:6e73/64 Scope:Link
>            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>            RX packets:79181 errors:0 dropped:0 overruns:0 frame:0
>            TX packets:69530 errors:0 dropped:0 overruns:0 carrier:0
>            collisions:0 txqueuelen:1000
>            RX bytes:91427974 (91.4 MB)  TX bytes:6226954 (6.2 MB)
>            Interrupt:11 Base address:0x8000 Memory:c0214000-c0214fff
>
> lo        Link encap:Local Loopback
>            inet addr:127.0.0.1  Mask:255.0.0.0
>            inet6 addr: ::1/128 Scope:Host
>            UP LOOPBACK RUNNING  MTU:16436  Metric:1
>            RX packets:1708 errors:0 dropped:0 overruns:0 frame:0
>            TX packets:1708 errors:0 dropped:0 overruns:0 carrier:0
>            collisions:0 txqueuelen:0
>            RX bytes:275161 (275.1 KB)  TX bytes:275161 (275.1 KB)
>
> tap0      Link encap:Ethernet  HWaddr e6:00:e5:3d:d4:17
>            inet addr:192.168.11.25  Bcast:192.168.11.25  Mask:255.255.255.255
>            inet6 addr: fe80::e400:e5ff:fe3d:d417/64 Scope:Link
>            UP BROADCAST RUNNING  MTU:1380  Metric:1
>            RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>            TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>            collisions:0 txqueuelen:500
>            RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
>
> route:
>
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
> default         117.128.171.1   0.0.0.0         UG    0      0        0 eth1
> 117.128.171.0   *               255.255.255.192 U     2      0        0 eth1
> 120.72.49.xxx   117.128.171.1   255.255.255.255 UGH   0      0        0 eth1
> link-local      *               255.255.0.0     U     1000   0        0 eth1
> 192.168.11.0    192.168.11.25   255.255.255.0   UG    0      0        0 tap0
>
>

Hi Eric,

Can you generate a log trace for us using the instructions below? 
Please make sure the log_level is at debug.
https://www.shrew.net/support/VPN_Bug_Report_Unix




More information about the vpn-help mailing list