[vpn-help] No connect when configured for jumbo frames
Paul Theodoropoulos
paul at anastrophe.com
Mon Oct 28 13:29:11 CDT 2013
On 10/25/13, 11:18 AM, Thomas Stokkeland wrote:
> If you are not doing SAN stuff, or very large file transfers within
> the collision domain - enabling Jumbo is likely to cause a crappier
> performance than leaving it at the standard 1500MTU - because, the
> router or receiving device will tell the sender to fragment, your
> packet will be split in half, this retransmit attempt will happen
> several times till the MTU is met - then as the "knowledge" of this
> expires your device will have to do that over and over.. causing a ton
> of extra traffic on your network.. so, if you don't have a requirement
> to use large MTU, then turn it off - i suspect there are mechanisms in
> the vpn software that either ignores large packets (because they are
> not to be routed) or just can't handle fragmentation at that level
That makes sense - thanks for the explanation. I suffer the "If an
optional value is bigger, it must therefore be better/faster/more, so I
need to use it" syndrome.
--
Paul Theodoropoulos
www.anastrophe.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20131028/1a0c9444/attachment.html>
More information about the vpn-help
mailing list