[vpn-help] Virtual adapter assigned IP address question (Netscreen 5GT)

[Parampat Aja]

Thank you Clemens, I changed my VPN IP pool to 10.10.20.1/24 subnet and it works :-)

From: parampat at hotmail.com
To: c.hoffmann at proses.de
CC: vpn-help at lists.shrew.net
Subject: RE: AW: [vpn-help] Virtual adapter assigned IP address question (Netscreen 5GT)
Date: Mon, 27 Dec 2010 22:24:20 +0000








Hi Clemens,
The VPN IP pool is the same subnet as my Netscreen LAN. I'll try assigning a different subnet.
MSN

From: C.Hoffmann at ProSeS.de
To: parampat at hotmail.com
CC: vpn-help at lists.shrew.net
Date: Mon, 27 Dec 2010 11:33:17 +0100
Subject: AW: [vpn-help] Virtual adapter assigned IP address question (Netscreen	5GT)











Hi,
 
The ipconfig data shown is correct.
Is the VPN IP pool the same subnet as your (NetScreen) LAN? I never got that working that way (but didn't try hard), and had to use a different subnet. That is working flawlessly unless the NS isn't the default gateway, and you do not
 have personal firewalls filtering incoming request from outside of your LAN.
 
Clemens
 


Von: vpn-help-bounces at lists.shrew.net [vpn-help-bounces at lists.shrew.net] im Auftrag von Parampat Aja [parampat at hotmail.com]

Gesendet: Montag, 27. Dezember 2010 01:08

An: vpn-help at lists.shrew.net

Betreff: [vpn-help] Virtual adapter assigned IP address question (Netscreen 5GT)





Hello community,



First of all, thank you for this great piece of software. After bending head over heal trying to configure my Netscreen 5GT 5.4.0r14.0 (Firewall+VPN), I was able to successfully connect. However, I can't seem to connect to
 any hosts behind VPN. I figure that it may be due to the virtual adapter is assigned only 1 IP address, with /32 mask and no gateway.




Ethernet adapter Local Area Connection* 12:



   Connection-specific DNS Suffix  . :
   Link-local IPv6 Address . . . . . : fe80::6de1:a277:54d:4c48%17
   IPv4 Address. . . . . . . . . . . : 10.10.10.211
   Subnet Mask . . . . . . . . . . . : 255.255.255.255
   Default Gateway . . . . . . . . . :




I followed this howto: http://www.shrew.net/support/wiki/HowtoJuniperSsg and for
 client configuration, I loaded the sample client configuration posted here: http://www.shrew.net/static/howto/JuniperSsg/juniperssg.vpn and just modified some fields.



Any help would really be appreciated.



Thanks,
MSN

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20101228/dd27d779/attachment-0002.html>