[vpn-help] Netgear FVS318

[lst_hoe02 at kwsoft.de]

Zitat von kpickard at simplyc.com:

>      Hello. Does anyone know if the Shrew client will work with the  
> Netgear FVS318 router?
>
>      I have scanned the archives and I have found references to the  
> FVG318 but nothing specific about the FVS318. I have seen references
> to needing Mode and Xauth enabled to get the FVS318 to work but  
> neither of those options exist on the FVS318 (that I can find). So I
> think those people are confusing the FVS318 with another model.
>
>      Has anyone been able to get the Netgear FVS318 (V1 hardware  
> running V2.4 firmware) to work with the Shrew client?
>
>      My initial attempts at trying various configurations have only  
> resulted in security warnings on my FVS318 indicating that UDP
> packets (from the Shrew Client) are being tossed because they  
> contain 'Suspicious UDP Data'. I have configured to use PSK. On the  
> client
> side, via Wireshark, I only see the ISAKMP packet being sent out  
> (this is the one being tossed by the FVS318) at 5 second intervals.  
> The
> Shrew client itself shows "bringing up tunnel ...", then eventually  
> followed by "negotiation timout [sic] occurred" after the ISAKMP
> packet has been sent 4 times.

Only some guess:
If the netgear has some form of firewall you maybe need to allow  
inbound UDP port 500 and if using UDP encapsulation port 4500 as well  
to get the tunnel up.

Regards

Andreas


-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 6046 bytes
Desc: S/MIME Cryptographic Signature
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20101026/6b0c93e4/attachment-0001.bin>