[vpn-help] Command line issues

Brian Jones brian at boku.net
Wed Aug 30 15:43:17 CDT 2006


Am I missing something with the command line feature?

ipsecc -r "cow"  -u myname -p mypass

Doing this launches the connect window where my username and password are
populated but I receive these messages:

config loaded for site 'cow'
configuring client settings ...
attached to IPSEC daemon ...
peer tunnel already defined
tunnel disabled
detached from IPSEC daemon ...

If I poke the connect button it connects normal and the VPN works.  The
Trace program shows this:

## : IPSEC Daemon, ver 1.1.0
## : Copyright 2006 Shrew Soft Inc.
## : This product linked OpenSSL 0.9.8a 11 Oct 2005
ii : rebuilding vnet device list ...
ii : device ROOT\VNET\0000 disabled
ii : rebuilding vprot interface list ...
ii : interface IP=10.1.200.156, MTU=1500, MAC=00:15:c5:0a:1c:28 active
ii : interface IP=10.1.200.155, MTU=1500, MAC=00:13:02:73:77:d0 active
ii : 2 adapter(s) active
ii : client ctrl thread begin ...
DB : tunnel added
DB : tunnel dereferenced ( ref count = 0, tunnel count = 1 )
ii : peer config message received
DB : ipsec peer found
!! : duplicate definition for 0.0.0.0
DB : removing all tunnel refrences
DB : tunnel deleted ( tunnel count = 0 )
ii : client ctrl thread exit ...

Thanks,
Brian




More information about the vpn-help mailing list