[vpn-help] Command line issues

[Brian Jones]

> -----Original Message-----
> From: Matthew Grooms [mailto:mgrooms at shrew.net] 
> Sent: Wednesday, August 30, 2006 4:48 PM
> To: Brian Jones
> Cc: vpn-help at lists.shrew.net
> Subject: Re: [vpn-help] Command line issues
> 
> Brian Jones wrote:
> > Am I missing something with the command line feature?
> > 
> > ipsecc -r "cow"  -u myname -p mypass
> > 
> > Doing this launches the connect window where my username 
> and password are
> > populated but I receive these messages:
> > 
> > config loaded for site 'cow'
> > configuring client settings ...
> > attached to IPSEC daemon ...
> > peer tunnel already defined
> > tunnel disabled
> > detached from IPSEC daemon ...
> > 
> > If I poke the connect button it connects normal and the VPN 
> works.  The
> > Trace program shows this:
> > 
> > ## : IPSEC Daemon, ver 1.1.0
> > ## : Copyright 2006 Shrew Soft Inc.
> > ## : This product linked OpenSSL 0.9.8a 11 Oct 2005
> > ii : rebuilding vnet device list ...
> > ii : device ROOT\VNET\0000 disabled
> > ii : rebuilding vprot interface list ...
> > ii : interface IP=10.1.200.156, MTU=1500, 
> MAC=00:15:c5:0a:1c:28 active
> > ii : interface IP=10.1.200.155, MTU=1500, 
> MAC=00:13:02:73:77:d0 active
> > ii : 2 adapter(s) active
> > ii : client ctrl thread begin ...
> > DB : tunnel added
> > DB : tunnel dereferenced ( ref count = 0, tunnel count = 1 )
> > ii : peer config message received
> > DB : ipsec peer found
> > !! : duplicate definition for 0.0.0.0
> > DB : removing all tunnel refrences
> > DB : tunnel deleted ( tunnel count = 0 )
> > ii : client ctrl thread exit ...
> > 
> 
> Brain,
> 
> Thanks for the report. Are you using alpha 3 or beta 1?


vpn-client-1.1-beta-1