[Vpn-help] Windows client to Linksys and network shares

[HIP-HiPpO]

  The client is running XPSP3 in a natted env in the subnet 
192.168.0.0/24.

  The Linksys (RV-082) LAN subnet is 10.7.4.0/24.

  Using group VPN, I can establish the tunnel and pass packets.  I can 
connect to web servers and ssh servers in the 10.7.4.0 subnet.  I cannot 
browse the SAMBA server which is configured with WINS.

  The address method used by the Shrew client is set to "Use an existing 
adapter and current address".  

  When I make a request to a web server or ssh service, the logs show my 
request sourcing from 192.168.0.5, the natt'ed IP of the client.

  When I set Shrew with a Local Host Address Method of "Use a Virtual 
Adapter and assigned address", selecting Obtain Automatically, then the 
tunnel does not fully establish.  If I configure a free address in the 
10.7.4.0 subnet, a tunnel becomes enabled, however I cannot pass any 
packets to the 10.7.4.0 subnet.

  Any suggestions?  Thanks