[Vpn-help] W7 x64 phase 1 time out when connecting to cisco. pcf used.

[Martin Malek]

Hi

I solved my problem by following this guide:
http://lists.shrew.net/pipermail/vpn-help/2008-May/001580.html

The thing is that I also uninstalled virtualbox at the same time so there
might be a problem when you have virtualbox. Or the guide simply helped me
revert my faulty installation of rc5.

Now all is well :)

/ Martin

-----Ursprungligt meddelande-----
Från: vpn-help-bounces at lists.shrew.net
[mailto:vpn-help-bounces at lists.shrew.net] För Martin Malek
Skickat: den 10 december 2009 19:09
Till: 'Matthew Grooms'
Kopia: vpn-help at lists.shrew.net
Ämne: Re: [Vpn-help] W7 x64 phase 1 time out when connecting to cisco. pcf
used.

Hi

I tried that but got the same result. How do I remove all traces of the
program manuall? I still shows my vpn profile after reinstalling so I would
like to be sure to make a clean install.

BR - Martin

-----Ursprungligt meddelande-----
Från: Matthew Grooms [mailto:mgrooms at shrew.net] 
Skickat: den 10 december 2009 09:22
Till: Martin Malek
Kopia: vpn-help at lists.shrew.net
Ämne: Re: [Vpn-help] W7 x64 phase 1 time out when connecting to cisco. pcf
used.

Martin Malek wrote:
> Hi
> 
> I just moved to W7 x64. First of all I accidently tried to install 
> 2.1.4 version which gave me lots of BSODs until I uninstalled and got 
> the 2.1.5-rc-5.
> 
> Started out by importing a pcf file which I want to use for the 
> connection. This pcf file worked fine on my previous Vista x64 
> version. 
> 
> I noticed now that my client UI never shows anything past ?bringing up 
> tunnel? message. I would expect the ?network device configured? message 
> followed by ?tunnel enabled?. Instead it seems to time out on phase 1 
> attempts.
> 
> Please find a loud version of the Trace log attached below.
> 
> Could you tell me if the problem is located on my computer or if the 
> cisco vpn is simply ignoring my requests? Perhaps my installation of 
> 2.1.4 messed up my miniports? If so how can I do a clean install? I 
> tried re-installing but still get the same errors.
> 

It looks like the client isn't getting a response back from the gateway 
( or the packets aren't really being sent for some reason ).

I would try booting into safe mode and re-installing the 2.1.5 client. 
The code hasn't changed much between the different versions that are 
capable of importing PCF files. This would lead me to believe that a 
part of the failed 2.1.4 installation may still be on your system and 
causing an issue.

-Matthew

_______________________________________________
vpn-help mailing list
vpn-help at lists.shrew.net
http://lists.shrew.net/mailman/listinfo/vpn-help