[Vpn-help] Connection to Linksys BEFVP41

[Gabor Boros]

Log from the router. This is the first time when I see the "This 
connection request matches tunnel 1 setting !". Strange.

Gabor

00:02:16 IKE[51] Rx << MM_I1 : 192.168.2.28 SA, VID, VID, VID, VID, VID, 
VID, VID, VID, VID, VID, VID
00:02:16 IKE[51] Tx >> MM_R1 : 192.168.2.28 SA
00:02:16 IKE[51] ISAKMP SA CKI=[10f0d1b0 1bc406fb] CKR=[8fd77b8e 345a7edf]
00:02:16 IKE[51] ISAKMP SA 3DES / SHA / PreShared / MODP_1024 / 3600 sec 
(*3600 sec)
00:02:17 IKE[51] Rx << MM_I2 : 192.168.2.28 KE, NONCE
00:02:17 IKE[51] Tx >> MM_R2 : 192.168.2.28 KE, NONCE
00:02:18 This connection request matches tunnel 1 setting !
00:02:18 IKE[1] Rx << MM_I3 : 192.168.2.28 ID, HASH
00:02:18 IKE[1] Tx >> MM_R3 : 192.168.2.28 ID, HASH
00:02:18 IKE[1] Rx << Notify : INITIAL-CONTACT
00:02:18 IKE[1] **Deleting old ESP_SA !
00:02:18 IKE[1] Tx >> QM_I1 : 192.168.2.28 HASH, SA, NONCE, KE, ID, ID
00:02:48 IKE[1] Rx << Delete ISAKMP_SA : cookie 10f0d1b0 1bc406fb | 
8fd77b8e 345a7edf
00:02:48 IKE[1] Tx >> Delete ISAKMP_SA : cookie 10f0d1b0 1bc406fb | 
8fd77b8e 345a7edf




Matthew Grooms írta:
> This is what I was referring to, the client trying to initiate the 
> phase2 exchange ...
> 
> 
> I just fixed the constant resend problem shown below ...
> 
> 
> For some reason the gateway doesn't like the phase2 proposal or the IDs 
> being sent. Without seeing the gateway log output, its difficult to tell 
> why its not responding.
> 
> -Matthew
>