[Vpn-help] Multiple network problem

[Matthew Grooms]

Robert Myhren wrote:
> Hi!
> 
> I have installed Shrew vpn client (v.2.1.4 ) on Windows Vista 64.
> The client is connecting to a Cisco IOS.
> 
> The tunnel is created as expected.
> 
> The Cisco gateway announces several subnets.
> 192.168.3.0/24 <http://192.168.3.0/24> 10.220.0.0/16 
> <http://10.220.0.0/16> and 192.192.168.113.0/24.
> 
> Now, if I define more than one subnet, or if is set to auto under "Policy",
> then I am not able to access any of the networks.
> 
> If I define only one network manually under "Policy", then it works for 
> that subnet.
> 
> I have found this in the logs,
> failed to create IPSEC policy route for 192.168.3.0/24 
> <http://192.168.3.0/24>
> 
> Any help is greatly appreciated.
> 

Robert,

Thanks for submitting this information. As you may have noticed, your 
virtual adapter has two IP addresses assigned to it. This particular 
problem been reported by others. I don't have a solution for this at the 
moment but I will try to get it fixed as soon as I can.

Thanks,

-Matthew