[Vpn-help] Cisco 6.3 Howto on www.shrew.net - Question

[Stefan Bauer]

* Knut Kroeger <knut.kroeger at dobatech.de> [16.03.2009 08:08]:
> Hi Stefan,
> -----Ursprüngliche Nachricht-----
> > Von: vpn-help-bounces at lists.shrew.net [mailto:vpn-help-
> > bounces at lists.shrew.net] Im Auftrag von Stefan Bauer
> > Gesendet: Samstag, 14. März 2009 18:01
> > An: 'vpn-help at lists.shrew.net'
> > Betreff: [Vpn-help] Cisco 6.3 Howto on www.shrew.net - Question
> >
> > Hi,
> >
> > as stated on the webpage:
> >
> > http://shrew.net/support/wiki/HowtoCiscoPix
> > Address Pool
> > The IP address pool must be configured. Clients will be assigned
> > private network addresses from a class C pool of 172.18.0.0/24.
> > ip local pool clientpool 172.18.0.2-172.18.0.11 mask 255.255.255.0
> > ---
> >
> > My Cisco Pix 501 FW 6.3 dont accept a mask option. So
> 
> You?re using the vpn wizard?
> Just check on the configuration tab the addresspool configuration. There you can set the mask of your desire.

Hi Knut,

i just walked through the CLI and there was no option to define a mask.
Anyway, i will give it a try today, if it works without as well.

-- 
stefan