[Vpn-help] Cisco 6.3 Howto on www.shrew.net - Question
Matthew Grooms
mgrooms at shrew.net
Wed Mar 18 23:46:14 CDT 2009
Stefan Bauer wrote:
> Hi,
>
> as stated on the webpage:
>
> http://shrew.net/support/wiki/HowtoCiscoPix
>
> Address Pool
>
> The IP address pool must be configured. Clients will be assigned
> private network addresses from a class C pool of 172.18.0.0/24.
>
> ip local pool clientpool 172.18.0.2-172.18.0.11 mask 255.255.255.0
>
> ---
>
> My Cisco Pix 501 FW 6.3 dont accept a mask option. so
>
> ip local pool clientpool 172.18.0.2-172.18.0.11 works. Is this a
> general problem or just missing in my firmware? Does it make sense
> anyway?
>
Hi Stefan,
This just sounds like a pix firmware difference. The important thing is
that the pool gets created and an address is assigned to the client. I
appreciate you posting the information in case someone else is presented
with the same issue.
Thanks again,
-Matthew
More information about the vpn-help
mailing list