[Vpn-help] configuring client for Fortigate

[Noach Sumner]

Did you already create the phase1 policy. As well strongly consider
upgrading to MR7P2.

On Wed, Mar 25, 2009 at 7:33 PM, Kurc Buzdegan <kurcbuz at gmail.com> wrote:

> Have followed the directions in the howtofortigate guide, but hitting a
> problem when attempting to setup the new firewall policy.  Details first -
> Router: Fortigate-60B 3.00-b5115(MR5 Patch 3).  Client [not ready to run
> yet, but will be the latest - 2.1.4.
>
> Problem: follow directions up to and including creating Phase 1 and Phase 2
> parameters in VPN IPSEC -
>
> Note following issues though - following directions verbatim, but system
> will not allow vpnclient_phase1 as this is too many characters so abbrev. to
> vpnclient_ph1 and _ph2, plus in guide under Phase 2 Parameters it says "To
> create a new Phase 2 definition, click on the Create Phase 1 button at the
> top of the screen".  When doing that a different screen comes up - so
> presumed it should be "click on the Create Phase 2 button" so maybe you
> should change that in the guide for clarity.  Back to problem...
>
> Creating a new policy, follow all directions as noted, but after selecting
> IPSEC in the Action dropdown, there is no "vpnclient_ph1" in the VPN tunnel
> drop down - just:
>
> ---- Auto Key ----
> ---- Manual Key ----
>
> Stuck at this point.
>
> Thanks in advance for the help.
>
> Kurc
>
>
>
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20090326/7cb7caa1/attachment-0002.html>