[Vpn-help] No return communication
Matthew Grooms
mgrooms at shrew.net
Sat May 2 14:19:03 CDT 2009
jcparker wrote:
> Client: Ubuntu 8.10 and Shrew soft 2.1.4
>
> Gateway: Linksys RV042 Firmware 1.3.12.6 (latest from Linksys.com)
>
> Followed the script from the Shrewsoft.com site for the linksys router.
>
> when the client is run from the workstation, a tunnel is established.
> ?This is verified from the log on the router.
>
> However am not able to connect to nay thing through the gateway. A
> windows machine is able to conect with same settings.
>
> I have verified the settings on rp_filter from
> http://lists.shrew.net/mailman/htdig/vpn-help/2008-November/001827.html
>
> Have sniffed on target network, and am not getting packets when ping is
> sent.
>
> Any ideas/help greatly appreciated.
>
Hi,
Are you certain that an IPsec SA is being negotiated successfully
between the client and the gateway? The client will report that you are
connected once an ISAKMP ( phase1 ) SA is established. After that, an
IPsec ( phase2 ) SA needs to be established before traffic can pass.
Have you checked the log output after increasing the level to debug?
http://www.shrew.net/support/wiki/BugReportVpnUnix
-Matthew
More information about the vpn-help
mailing list