[Vpn-help] Can't communicate with systems on far end of VPN

[Jack Allen]

Hello:
	I can establish a VPN to my company network, but I cannot access any
systems. I suspect it may be the IP Address range my home network is using
and the IP Address range the company network is using and/or the net mask I
am using on my home network.

	My home network address range is 10.11.12.* witch a net mask of
255.0.0.0. Then Netgear router IP Address of 10.11.12.254, which also does
DHCP.

	I have a company Laptop that I connect to my home network and let
the Netgear router allocate the IP Address which at this time is
10.11.12.102 with a net mask of 255.255.255.0 and default route of
10.11.12.254. On it I run the company provided Cisco VPN client which works
fine. I can provide the VPN IP Address information if needed.

On my personal PC where I have installed ShrewSoft VPN 2.1.5-rc4 has IP
Address 10.11.12.1 with a net mask of 255.0.0.0 and default route of
10.11.12.254.

	Company network address range is 10.*.*.* with a net mask of I think
255.255.255.0.

	When I establish the VPN it looks like the IP Address is
10.71.160.61 (which I assume will change each time) with a net mask of
255.255.255.0. On one status window there is a 143.112.122.12 IP Address.

Thanks:
	Jack Allen


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20091122/2ddf3535/attachment-0001.html>