[Vpn-help] Connection established and then disconnects
Jeff Allison
Jeff.Allison at Amate.us
Mon Nov 9 15:56:51 CST 2009
On 11/5/2009 9:01 AM, Clayton Dukes wrote:
> I have the exact same problem but was unable to find a solution. If u
> do, please let me know!
I will, but I haven't seen any responses so far. It's frustrating as
things were working fine and then suddenly stopped.
- Jeff
> Sent from my iPhone
> On Nov 5, 2009, at 11:31 AM, Jeff Allison <Jeff.Allison at amate.us> wrote:
>> Hello,
>> I recently started using the Shrew Soft VPN client on a 64-bit Windows
>> 7 system. It was working well until this morning. I had a reboot
>> overnight to install Windows updates, which is the only recent change.
>> OS: Windows 7 64-bit
>> Client version: 2.1.0
>> VPN: Cisco (sorry, don't know the specifics).
>> Symptoms: I can bring up the client and seemingly get a tunnel
>> established, but I cannot connect to the remote network. After about
>> 15 seconds the client reports that it has disconnected:
>> config loaded for site 'sfbay.pcf'
>> configuring client settings ...
>> attached to key daemon ...
>> peer configured
>> iskamp proposal configured
>> esp proposal configured
>> client configured
>> local id configured
>> pre-shared key configured
>> bringing up tunnel ...
>> network device configured
>> tunnel enabled
>> [about a 15 second pause here]
>> session terminated by gateway
>> tunnel disabled
>> detached from key daemon ...
>> Debug log attached. Any help with this would be appreciated!
>> - Jeff
More information about the vpn-help
mailing list