[Vpn-help] Can't Connect To Internet While on VPN

[Brian Donahue]

Thank you!  I think I have it working now (only tested briefly, but so far,
so good!)


On Mon, Nov 23, 2009 at 12:28 PM, P.M.S.Prakash <prakashpms at gmail.com>wrote:

> It is not the gateway IP, the network that you are VPNing into. Typically
> the VPN tunnel definition should contain the local networks that it has
> access to and you should be able to find out from there.
>
>
> On Mon, Nov 23, 2009 at 9:20 PM, Brian Donahue <brian at pigeonmoon.com>wrote:
>
>> Sorry for my lack of knowledge in this area... by remote subnets, do you
>> mean I'd need to add gateway IPs or some such for the network I am VPNing
>> into?  Is there an easy way to find which IPs I should add?
>>
>>
>> On Fri, Nov 20, 2009 at 11:03 PM, P.M.S.Prakash <prakashpms at gmail.com>wrote:
>>
>>> Hi Brian,
>>>
>>> In the Policy tab, instead of "Obtain Topology Automatically...", add
>>> manual tries for the remote subnets. This will enable to use VPN for remote
>>> networks and local network for internet.
>>>
>>> -- Prakash
>>>
>>> On Sat, Nov 21, 2009 at 2:20 AM, Brian Donahue <brian at pigeonmoon.com>wrote:
>>>
>>>> On my old Cisco 32-bit connection, I was able to access local networks
>>>> and the internet while connected to the VPN, but with ShrewSoft, I can no
>>>> longer do that.  Is this fixable with some configuration, or is it not
>>>> possible?
>>>>
>>>> Thank you,
>>>>
>>>> Brian
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> vpn-help mailing list
>>>> vpn-help at lists.shrew.net
>>>> http://lists.shrew.net/mailman/listinfo/vpn-help
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20091123/4f5e49bd/attachment-0002.html>