[Vpn-help] Phase 2 failing while connection to Cisco 2800 Router

[Matthew Grooms]

Edwards Stephen wrote:
> Problem:
  >
> The VPN client fails to complete the phase 2 request and the fail 
> counter on the network tab increments. When trying to ping a server at 
> the remote end no response is made. Authentication is however successful 
> and routes are set up at the local end.
> 
> Attached are the logs as detailed. I’ve also included the log from the 
> Cisco Client that functions in the VM image but not on the 64bit Windows 
> 7 image.
> 

Stephen,

The negotiation looks healthy other than the NO-PROPOSAL-CHOSEN message 
being received. Have you tried a few likely PFS settings for phase2 
proposals? The other possibility is that the gateway is configured to 
required IPsec over TCP which is proprietary and unsupported at this time.

-Matthew