[Vpn-help] Windows client 2.1.4, Arkoon & autoconfiguration issues

[Philippe ROSE]

For arkoon with mutual RSA authentication you have to put configuration to use an existing adapter and you have to add network addresses to ressources in the policy parameters (in my following config, 192.168.3.0/24). Here's the relevant parameters of my .vpn export file (add your IP adresses and credentials):

n:version:2
n:network-ike-port:500
n:network-mtu-size:1380
n:client-addr-auto:0
n:network-natt-port:4500
n:network-natt-rate:15
n:network-frag-size:540
n:network-dpd-enable:1
n:client-banner-enable:0
n:network-notify-enable:1
n:client-wins-used:0
n:client-wins-auto:0
n:client-dns-used:0
n:client-dns-auto:0
n:client-splitdns-used:0
n:client-splitdns-auto:0
n:phase1-dhgroup:2
n:phase1-keylen:256
n:phase1-life-secs:86400
n:phase1-life-kbytes:0
n:vendor-chkpt-enable:0
n:phase2-keylen:256
n:phase2-life-secs:3600
n:phase2-life-kbytes:0
n:policy-nailed:0
n:policy-list-auto:0
s:client-auto-mode:disabled
s:client-iface:direct
s:network-natt-mode:enable
s:network-frag-mode:enable
s:auth-method:mutual-rsa
s:ident-client-type:asn1dn
s:ident-server-type:asn1dn
s:phase1-exchange:main
s:phase1-cipher:aes
s:phase1-hash:sha1
s:phase2-transform:esp-aes
s:phase2-hmac:sha1
s:ipcomp-transform:disabled
n:phase2-pfsgroup:2
s:policy-list-include:192.168.3.0 / 255.255.255.0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.shrew.net/pipermail/vpn-help/attachments/20090915/018bc9ee/attachment.html>