[Vpn-help] A little help?

[Mark Williams]

It's some sort of negotiating with the concentrator.  They can look at  
the log when you try to authenticate and change the profile for you or  
tell you what it is so you can customize your settings.


Mark
cim at att.net


On Sep 2, 2009, at 12:41 PM, Brian Guild <bguild at gmail.com> wrote:

> Walt, I had the same exact problem connecting to my Cisco 3000 VPN
> concentrator, using Windows 7 64bit, and I have yet to figure out the
> problem.
>
> On 9/2/09, Walt Carr <waltc1 at gmail.com> wrote:
>> I am using ShrewSoft VPN client to connect to a Cisco VPN.  I have  
>> loaded
>> 2.1.5-rc-2 so that I could use the pcf profile.  All seems to go  
>> smooth
>> until I connect.
>> I am able to connect using this profile and a Cisco client on my XP  
>> laptop.
>> I am trying Shrew because I am attempting to use my Vista-64  
>> laptop.  I
>> really didn't expect it to go smooth.  Any words of wisdom would be  
>> greatly
>> appreciated.
>> Walt
>>
>>
>> configuring client settings ...
>>
>> attached to key daemon ...
>>
>> peer configured
>>
>> iskamp proposal configured
>>
>> esp proposal configured
>>
>> client configured
>>
>> local id configured
>>
>> pre-shared key configured
>>
>> bringing up tunnel ...
>>
>> session terminated by gateway
>>
>> tunnel disabled
>>
>> detached from key daemon ...
>>
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help