[Vpn-help] Can not import pcf file
Shane Smith
shane.smith at nsstc.uah.edu
Fri Sep 11 13:20:55 CDT 2009
I am having the exact problem you are with the same VPN appliance series. I
have tried 2.1.4 and 2.1.5 RC3. It connects, gets our banner, then can't
connect to anything. After about a minute I get the "Gateway is not
responding" error and it disconnects.
-----Original Message-----
From: vpn-help-bounces at lists.shrew.net
[mailto:vpn-help-bounces at lists.shrew.net] On Behalf Of Jens Nielsen
Sent: Friday, September 11, 2009 12:04 PM
To: vpn-help at lists.shrew.net
Subject: [Vpn-help] Can not import pcf file
After getting a PC with Vista 64bit, I no longer can use my old client,
so I've attempted to build 2.1.5-rc-3 for my access.
I first tried to import my pcf file, but that didn't work.
This is the file:
Host, GroupName and GroupPwd have been changed
[main]
Description=CityUser
Host=0.0.0.0
AuthType=1
GroupName=MyUser
GroupPwd=mypassword
EnableISPConnect=0
ISPConnectType=0
ISPConnect=
ISPCommand=
Username=
SaveUserPassword=0
EnableBackup=0
BackupServer=
EnableNat=1
EnableLocalLAN=1
TunnelingMode=0
I tried a manual configuration, but i get the same problem as another
user reported:
bringing up tunnel ...
network device configured
tunnel enabled
session terminated by gateway
tunnel disabled
detached from key daemon ...
According to our networking people, we us a Cisco VPN3030 for our VPN
access.
Any help would be appreciated.
_______________________________________________
vpn-help mailing list
vpn-help at lists.shrew.net
http://lists.shrew.net/mailman/listinfo/vpn-help
More information about the vpn-help
mailing list