[vpn-help] [Vpn-help] Adapter Configuration Failed

[Paul Kuckein]

Mathew --

I am having a similar problem to that described in the the "[Vpn-help] 
Adapter Configuration Failed" thread.

I have installed the latest version of the Client (2.1.5) on my 32-bit 
Vista machine.

I installed it on top of version 2.1.4, which appeared to uninstall 
correctly.

I then set up the pcf profile as used by others in my company.

When I try to connect, I get the following messages:

    config loaded for site 'USA_SFBay.pcf'
    configuring client settings ...
    attached to key daemon ...
    peer configured
    iskamp proposal configured
    esp proposal configured
    client configured
    local id configured
    pre-shared key configured
    bringing down tunnel ...
    adapter configuration failed
    tunnel disabled
    detached from key daemon ...


I tried resetting the wi-fi adapter on my Toshiba L355 Laptop  through 
which Shrew is trying establish a tunnel.  Everything looks good -- the 
wi-fi Internet connection is working fine and I am sending this e-mail 
using it.


-- 

Regards,
Paul Kuckein
Principal Hardware Engineer
Sun Systems Quality and Reliability Engineering
Oracle Corporation
(408) 276-6862 (x1-6862)
M/S USCA14-226

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.shrew.net/pipermail/vpn-help/attachments/20100204/360efda7/attachment.html>