[vpn-help] VPN access to SA520

[Salvatore Basso]

Hi, I would like help why I have problem with vpn connection with Shrewsoft 
to SA 520.
On Cisco appliance I have configured an VPN with IPSEC and PSK but when I 
try to connect I have in log:

2010-02-12 09:04:55: INFO:  Adding IPSec configuration with identifier 
"myvpn"
2010-02-12 09:04:55: INFO:  Adding IKE configuration with identifer "myvpn"
2010-02-12 10:14:05: ERROR:  Could not find configuration for 217.x.y.z[500]

I have used the default parameter on Cisco, and on vpn client I have 
configured this parameters:

Authentication Method --> Mutual PSK+XAuth
Identification Type: FQDN --> local.com
Remote Identity: Any

..and all others parameters are default.

When I try to connect I have on Shrewsoft I have:

config loaded for site 'myvpn'
configuring client settings ...
attached to key daemon ...
peer configured
iskamp proposal configured
esp proposal configured
client configured
local id configured
pre-shared key configured
bringing up tunnel ...
negotiation timout occurred
tunnel disabled
detached from key daemon ...

I very much hope in a your help, thanks.

-
 Salvatore.