[vpn-help] Tunnel established but not working

[Matthew Grooms]

On 2/24/2010 2:04 AM, Intellia Informations wrote:
> Hello,
>
> I am able to established a tunnel between the remote host client running
> ShrewVPNClient and a remote network.
>
> But no traffic is running on the tunnel and the ping or tracert (with IP
>
> address) do not know a remote machine on the remote network .
>
> When using CISCO VPN Client, it works well.
>
> I have done some trace log files with the trace utility... but not able
> to understand what is wrong.
>
> I tried with or without NAT-T : no change, remote host still can not be
> reached.
>
> I need some advice : it would be very helpful,
>

Hi Pierre,

The VPN client is completing phase1 without any issue. The gateway is 
complaining about NO-PROPOSAL-CHOSEN for phase2. This usually means 
there is some setting that isn't correct. Try switching the PFS settings 
between group2 and disabled and see if that has any effect.

-Matthew