[vpn-help] Netgear Prosafe DGFV338 Gateway Mode Config help

[Patrick MacEwen]

Hello

I require to set up a tunnel between a windows 7 pro (64 bit) client using
release 2.1.5 and a netgear prosafe DGFV338.

 

I'm comfortable following the netgear commercial gateway howto in the
support section.

 

However, In setting up the Mode Config Record -  I'm not sure which IP
addresses I should put in there ( both in the client pool and Traffic Tunnel
Security settings)

 

My gateway local IP address is 192.168.10.1/255.255.255.0

 

Could anyone advise as to what my Pool IP address, wins and dns server
settings should be set to and also should I use 192.168.10.1 as my "Local IP
address etc?

 

Many thanks

Patrick MacEwen

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.shrew.net/pipermail/vpn-help/attachments/20100113/4dcc3bb7/attachment.html>