[vpn-help] Problem with Shrew client via Linksys WRT45g gateway

[mikelupo at aol.com]

I have a shrew VPN client up and running on a Windows 7 professional (laptop). With the laptop at home, going through my netgear router, I have no problem starting and using the VPN connection reliably. Once the connection is made I can ping workstations inside the remote secure LAN. The world is good.

However, now that the laptop has been deployed to the employee for whom I built if for, we cannot seem to get the same result.
Attached is a doc file containing screenshot of the VPN trace utility.
It appears that we're getting through Phase 1 and Phase 2 reliably. On the linksys WRT54G, We've also opened up Port 500 for forwarding and triggering just to be safe. 

Remote secure network LAN address 192.168.1.x
DHCP address given by VPN to shreew client 192.168.2.50
Local IP of the laptop sitting in the home/office of employee 10.0.0.4

Matthew, do you have any words of wisdom? Whereas this was working before on my home network, I don't want to rush to change client software versions. The laptop is 120 miles away and talking the employee through this isn't going to be easy.

Thanks,
Mike



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.shrew.net/pipermail/vpn-help/attachments/20100715/841b260a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Trace_logs.doc
Type: application/octet-stream
Size: 663552 bytes
Desc: not available
URL: <http://lists.shrew.net/pipermail/vpn-help/attachments/20100715/841b260a/attachment.obj>