[vpn-help] VPN NETGEAR HELP

Sidney Rego srego at seclon.com
Wed Jul 21 12:25:16 CDT 2010


Hi,

 

We are trying to set up a vpn connection on Win 7 and am having trouble
setting it up. We have followed the instructions
http://www.shrew.net/support/wiki/HowtoNetgear and are getting errors from
the firewall :

 

 2010 Jul 21 12:49:03 [FVX538] [IKE] Rejected phase 1 proposal as 

 Peer\'s authentication method \"XAuth psk server\" mismatched with 

 Local \"pre-shared key\"._ 2010 Jul 21 12:49:03 [FVX538] [IKE] No 

 suitable proposal found for xxx.xxx.xxx.xxx[23695]._ 2010 Jul 21 

 12:49:03 [FVX538] [IKE] Failed to get valid proposal for 

 xxx.xxx.xxx.xxx[23695].

 

And the message from the VPN :

 

10/07/21 13:10:20 ii : ipc client process thread begin ...
10/07/21 13:10:20 <A : peer config add message
10/07/21 13:10:20 DB : peer added ( obj count = 1 )
10/07/21 13:10:20 ii : local address 10.100.5.117 selected for peer
10/07/21 13:10:20 DB : tunnel added ( obj count = 1 )
10/07/21 13:10:20 <A : proposal config message
10/07/21 13:10:20 <A : proposal config message
10/07/21 13:10:20 <A : client config message
10/07/21 13:10:20 <A : xauth username message
10/07/21 13:10:20 <A : xauth password message
10/07/21 13:10:20 <A : local id 'fvx538_remote.com' message
10/07/21 13:10:20 <A : remote id 'fvx538_remote.com' message
10/07/21 13:10:20 <A : preshared key message
10/07/21 13:10:20 <A : remote resource message
10/07/21 13:10:20 <A : peer tunnel enable message
10/07/21 13:10:20 DB : new phase1 ( ISAKMP initiator )
10/07/21 13:10:20 DB : exchange type is aggressive
10/07/21 13:10:20 DB : 10.100.5.117:500 <-> xx.xx.xxx.xxx:500
10/07/21 13:10:20 DB : 03aefbfac8744560:0000000000000000
10/07/21 13:10:20 DB : phase1 added ( obj count = 1 )
10/07/21 13:10:20 >> : security association payload
10/07/21 13:10:20 >> : - proposal #1 payload 
10/07/21 13:10:20 >> : -- transform #1 payload 
10/07/21 13:10:20 >> : key exchange payload
10/07/21 13:10:20 >> : nonce payload
10/07/21 13:10:20 >> : identification payload
10/07/21 13:10:20 >> : vendor id payload
10/07/21 13:10:20 ii : local supports XAUTH
10/07/21 13:10:20 >> : vendor id payload
10/07/21 13:10:20 ii : local supports nat-t ( draft v00 )
10/07/21 13:10:20 >> : vendor id payload
10/07/21 13:10:20 ii : local supports nat-t ( draft v01 )
10/07/21 13:10:20 >> : vendor id payload
10/07/21 13:10:20 ii : local supports nat-t ( draft v02 )
10/07/21 13:10:20 >> : vendor id payload
10/07/21 13:10:20 ii : local supports nat-t ( draft v03 )
10/07/21 13:10:20 >> : vendor id payload
10/07/21 13:10:20 ii : local supports nat-t ( rfc )
10/07/21 13:10:20 >> : vendor id payload
10/07/21 13:10:20 ii : local supports FRAGMENTATION
10/07/21 13:10:20 >> : vendor id payload
10/07/21 13:10:20 ii : local supports DPDv1
10/07/21 13:10:20 >> : vendor id payload
10/07/21 13:10:20 ii : local is SHREW SOFT compatible
10/07/21 13:10:20 >> : vendor id payload
10/07/21 13:10:20 ii : local is NETSCREEN compatible
10/07/21 13:10:20 >> : vendor id payload
10/07/21 13:10:20 ii : local is SIDEWINDER compatible
10/07/21 13:10:20 >> : vendor id payload
10/07/21 13:10:20 ii : local is CISCO UNITY compatible
10/07/21 13:10:20 >= : cookies 03aefbfac8744560:0000000000000000
10/07/21 13:10:20 >= : message 00000000
10/07/21 13:10:20 -> : send IKE packet 10.100.5.117:500 -> xx.xx.xxx.xxx:500
( 533 bytes )
10/07/21 13:10:20 DB : phase1 resend event scheduled ( ref count = 2 )
10/07/21 13:10:25 -> : resend 1 phase1 packet(s) 10.100.5.117:500 ->
xx.xx.xxx.xxx:500
10/07/21 13:10:30 -> : resend 1 phase1 packet(s) 10.100.5.117:500 ->
xx.xx.xxx.xxx:500

10/07/21 13:10:35 -> : resend 1 phase1 packet(s) 10.100.5.117:500 ->
xx.xx.xxx.xxx:500
10/07/21 13:10:40 ii : resend limit exceeded for phase1 exchange
10/07/21 13:10:40 ii : phase1 removal before expire time
10/07/21 13:10:40 DB : phase1 deleted ( obj count = 0 )
10/07/21 13:10:40 DB : policy not found
10/07/21 13:10:40 DB : policy not found
10/07/21 13:10:40 DB : tunnel stats event canceled ( ref count = 1 )
10/07/21 13:10:40 DB : removing tunnel config references
10/07/21 13:10:40 DB : removing tunnel phase2 references
10/07/21 13:10:40 DB : removing tunnel phase1 references
10/07/21 13:10:40 DB : tunnel deleted ( obj count = 0 )
10/07/21 13:10:40 DB : removing all peer tunnel refrences
10/07/21 13:10:40 DB : peer deleted ( obj count = 0 )
10/07/21 13:10:40 ii : ipc client process thread exit ...

Thanks in advance

 

 

 


Sidney Rego

 

E-mail:  <mailto:srego at seclon.com> srego at seclon.com 
Tel:  (416) 646 - 5190 
Fax: (416) 484 - 9869

 

 

 seclonLogic Inc. <http://www.seclonlogic.com/images/lp4.gif> 


 

 

 

 


49 The Donway West, Suite 201, North York, On, M3C 3M9, Canada. 

 <http://www.seclonlogic.com> www.seclonlogic.com


 

 

 



This  message (including any attachments) contains confidential information
intended  for a specific individual or individuals. If you are not the
intended  recipient, please delete this message and all attachments
immediately. Any  disclosure, copying, distribution or any other action
based on this message or  any of the attachments is strictly prohibited.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20100721/786254fb/attachment-0001.html>


More information about the vpn-help mailing list