[vpn-help] Netgear FVG318

Tue Jun 1 11:11:41 CDT 2010

Adding to Michal W's comment.
As far as I know the NetGear OEM VPN client only works on Windows XP...not Vista or Windows 7, which is why I suspect you might have opted for the Shew client to begin with. It's certainly why I'm using it. There was rumor that Netgear was going to release an updated client to support Windows Vista/7, but I've not yet heard anything official to that effect.

Regards,
Mike

-----Original Message-----
From: Michał Węgrzyn <Michal at comfortel.pl>
To: Tilman <tilman78 at gmx.de>; vpn-help at lists.shrew.net
Sent: Tue, Jun 1, 2010 11:37 am
Subject: Re: [vpn-help] Netgear FVG318

Hi,

No it won't work due to bug in all NetGear products (bug in VPN - wrong messages are sent).
Only ModeConfig+XAUTH works with Shrew.
If you have NetScreen Remote (NetGear OEM VPN client) it will work with FVG318.

Regards,
 Michal Wegrzyn

----- Original Message ----- 
From: Tilman 
To: vpn-help at lists.shrew.net 
Sent: Monday, May 31, 2010 10:45 PM
Subject: Re: [vpn-help] Netgear FVG318

Mike, thank you for taking the time to reply. I assume the Netgear FVG318 is the cheap brother of the FVS318. The FVG318 does neither support mode config nor xauth. The admin settings of the FVG318 don't show these options.

Is it possible to use the shrew client with a VPN gateway that doesn't have mode config and xauth?

Tilman

----------------------
From: mikelupo at aol.com [mailto:mikelupo at aol.com] 
Sent: Friday, May 14, 2010 7:55 PM
To: tilman78 at gmx.de; vpn-help at lists.shrew.net
Subject: Re: [vpn-help] Netgear FVG318

Did you ever get a reply?
You MUST use mode config with the shrew client and FVS318. I just set one up this past week.
Make sure that the mode config IP address that's assigned is not the same subnet as the VPN router's internal LAN address.
For example, if you use 192.168.1.1 as the VPN LAN gateway address, then make sure your assigned IP addresses by mode-config are something like 192.168.2.x

You must also use XAUTH. Setting it up was very straightforward. Sorry I can't recall the steps at the moment but I did read about it in the howto section of the the shrew.net website.

Hope this helps!
Mike

-----Original Message-----
From: Tilman <tilman78 at gmx.de>
To: vpn-help at lists.shrew.net
Sent: Wed, May 12, 2010 8:16 am
Subject: [vpn-help] Netgear FVG318
Thank you very much for providing this VPN client!

I have a Netgear FVG318. I hope I have done my homework .. I searched the list 

archive, there was only one unanswered email about this device.

Has some successfully connected to this Netgear gateway? The HowToNetgear 

article http://www.shrew.net/support/wiki/HowtoNetgear is for other Netgear VPN 

Gateways that support Mode Config. The FVG318 does not have a Mode Config 

option.

Trying to connect to this gateway the device is logging as final error:

Invalid exchange type 6

Google-researching it seems that this message has to do with Mode Config. I 

found this email from 2006, mentioning how to make sure not to use any Mode 

Config features with the Shrew Client:

http://lists.shrew.net/pipermail/vpn-help/2006-October/000610.html

I tried disabling all these, but am still getting the same error message on the 

gateway.

Any advice on how (and if it is possible at all) to connect to the FVG318 would 

be appreciated!

Thanks,

Tilman

-- 

GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!

Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01

_______________________________________________

vpn-help mailing list

vpn-help at lists.shrew.net

http://lists.shrew.net/mailman/listinfo/vpn-help

-- 
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01
_______________________________________________
vpn-help mailing list
vpn-help at lists.shrew.net
http://lists.shrew.net/mailman/listinfo/vpn-help

_______________________________________________
pn-help mailing list
pn-help at lists.shrew.net
ttp://lists.shrew.net/mailman/listinfo/vpn-help

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20100601/70a839bd/attachment-0002.html>