[vpn-help] Fwd: Internet connection dies after some minutes of heavy download traffic

Uracs Tamás uracs.tamas at peetandcook.hu
Thu Jun 17 03:53:13 CDT 2010


Hi Matthew,

I transferred 50GB and the error did not occurred. However I have excessive processor usage. Svchost.exe runs network related services on my PC. I try to run hijackthis to identify the problem.

Best,

Tamas

-----Original Message-----
From: Matthew Grooms [mailto:mgrooms at shrew.net] 
Sent: Tuesday, June 15, 2010 6:09 PM
To: Uracs Tamás
Cc: vpn-help at lists.shrew.net
Subject: Re: [vpn-help] Fwd: Internet connection dies after some minutes of heavy download traffic

On 6/15/2010 10:12 AM, Uracs Tamás wrote:
> Hi Matthew,
>

Hi Tamas,

> I testing the lwf9 build and no connection loss so far.
> Should I step forward to the lwf 10?

Yes please.

> Is it normal, if I try to connect a VPN the result is BSOD?
>

Yes. The drivers you are testing are stitched together hybrids of the Shrew Soft and Microsoft sample drivers. Descriptions and a few brief instructions were included in my previous email. Please let me know if
lwf-10 or lwf-11 cause the issue.

Thanks again,

-Matthew

>
> -----Original Message-----
> From: Matthew Grooms [mailto:mgrooms at shrew.net]
> Sent: Saturday, June 12, 2010 7:44 PM
> To: Uracs Tamás
> Cc: vpn-help at lists.shrew.net
> Subject: Re: [vpn-help] Fwd: Internet connection dies after some 
> minutes of heavy download traffic
>
> On 6/11/2010 7:55 AM, Uracs Tamás wrote:
>> Hi Matthew,
>>
>> I just had a network loss with the lwf8 build.
>>
>
> Hi Tamas,
>
> Thanks for testing. I'm a little disappointed that we aren't closer to fixing this issue yet. Here are three new builds to try. I went back to the Microsoft example driver and copied the send receive path functions into our driver for testing ...
>
> http://www.shrew.net/download/vpn/vpn-client-2.1.6-lwf-9.exe
> http://www.shrew.net/download/vpn/vpn-client-2.1.6-lwf-10.exe
> http://www.shrew.net/download/vpn/vpn-client-2.1.6-lwf-11.exe
>
> lwf9 - Both the send and receive functions are replaced with MS sample passthru functions. If we still see a problem with this build, then we need to consider that the problem may not be the fault of our driver.
>
> lwf10 - The receive functions are replaced with MS sample functions. If we see a problem with this build, there may be an issue with breaking up the send NBLs before processing ( completely legal according to MS docs ).
>
> lwf11 - The send functions are replaced with MS sample functions. If we see a problem with this build, there may be an issue with breaking up the receive NBLs before processing ( completely legal according to MS docs but re-linking is required when ownership is returned to a caller under low resource conditions ).
>
> I also left the driver debug output enabled so it can be captured with a utility such as debugview ...
>
> http://technet.microsoft.com/en-us/sysinternals/bb896647.aspx
>
> If lwf9 works correctly, but lwf10 or lwf11 exhibits the issue, please capture the output and forward it to me. I would advise against doing this until you determine which package ( 10 or 11 ) is suspect. It will slow down your system and potentially alter the outcome of your tests.
> With any luck, we may see something interesting in the logs.
>
> Thanks again for your help. I look forward to hearing the results.
>
> -Matthew
>




More information about the vpn-help mailing list