[vpn-help] Using Shrew with a Netgear DG834Gv3

[Michal Wegrzyn]

Did your PC with IP 192.168.0.2 support IPSEC tunel ? - you forward UDP port 500 to that machine.
As I read you have IPSEC configured on your router so couldn't forwart port UDP 500 to any of LAN machines.

Regards, 
 Michal Wegrzyn
  ----- Original Message ----- 
  From: stel at mail.usa.com 
  To: vpn-help at lists.shrew.net 
  Sent: Sunday, May 02, 2010 3:21 PM
  Subject: Re: [vpn-help] Using Shrew with a Netgear DG834Gv3


  Hi everyone,

  I attach screenshots from both the server and client.
  I'd appreciate it if you could have a look because I'm a bit stuck.

  As I said, using PPTP (Windows' own software) the VPN works with no issues.

  Many thanks







  -----Original Message-----
  From: stel at mail.usa.com
  To: vpn-help at lists.shrew.net
  Sent: Sat, May 1, 2010 2:07 pm
  Subject: Using Shrew with a Netgear DG834Gv3


  Hi there,

  I'm hoping someone will be able to help with this.

  I'm getting the "negotiation timout occurred" error in Shrew when trying to connect.

  Just to be clear, Using Microsoft's own Windows software (PPTP) on both machines the VPN works fine. I can connect, map network drives and access files.
  So I'm sure that static ip address, firewalls etc all work.

  I can email the full debug / error report as well as screenshots from both server and client, if you want.

  I'd really appreciate some help, as I'm stuck.

  Many thanks




------------------------------------------------------------------------------


  _______________________________________________
  vpn-help mailing list
  vpn-help at lists.shrew.net
  http://lists.shrew.net/mailman/listinfo/vpn-help
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20100503/b32a4caa/attachment-0001.html>