[vpn-help] Fortigate DHCP is not working

[Nicola Bressan]

I did it in an Arkoon fw, in fact their proprietary client is working with the same settings, but shrew client keep saying no dhcp answer from gw and on fw log i see can't answer 'cause no SA connection is known for ... and it states a SA currently available and configurered on fw. 

Sent from my iPhone

Il giorno 07/ago/2011, alle ore 09:19, Noach Sumner <nss at compu-skill.com> ha scritto:

> Currently have the Fortigate working with Shrew. Did you make sure to create the fule to allow the DHCP address to be assigned in the firewall? It sounds like that is probably missing.
> 
> On Sat, Aug 6, 2011 at 12:52 AM, Nicola Bressan <nicola.bressan at smc.it> wrote:
> same problem with different firewall, i think there's is a problem with the vpn client then.
> 
> Sent from my iPhone
> 
> Il giorno 05/ago/2011, alle ore 19:13, brian charles <briancharles at hotmail.com> ha scritto:
> 
>> If I manually assign an IP address in the client and connect things are good. However, I have a lot of users and really need DHCP to work.
>> 
>> Testing environment is:
>> 
>> Client: Windows 7 b4 bit with Shrewsoft vpnclient ver. 2.1.7
>> 
>> and connecting to 
>> 
>> Fortigate 100, Fortigate-100 3.00-b0568(MR5 Patch 3)
>> 
>> 
>> If I use the DHCP over IPSEC option then:
>> 
>> The error is No DHCP Response From Gateway
>> 
>> I followed this link to get the configurations set up. http://www.shrew.net/support/wiki/HowtoFortigate
>> 
>> Thank you for your help!
>> 
>> Brian
>> _______________________________________________
>> vpn-help mailing list
>> vpn-help at lists.shrew.net
>> http://lists.shrew.net/mailman/listinfo/vpn-help
> 
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20110807/19c358b5/attachment-0002.html>