[vpn-help] MULTIPLE VPN tunnels - simultaneous connections

[Christina Abbascia]

Hi Kevin,  

No overlapping subnets and no "tunnel all" either.  But!!! It's working now!

I tried once again behind a different router and ISP (was testing at work over ADSL, then tested again using SAME laptop at home) and I was totally able to connect to both tunnels and send traffic down them simultaneously.  

Not sure why really.

Christina

-----Original Message-----
From: vpn-help-bounces at lists.shrew.net [mailto:vpn-help-bounces at lists.shrew.net] On Behalf Of kevin vpn
Sent: Thursday, January 06, 2011 6:45 PM
To: vpn-help at lists.shrew.net
Subject: Re: [vpn-help] Unable to install 2.1.7 - driver errors.

On Thu, 6 Jan 2011 16:23:41 +0200
Christina Abbascia <cabbascia at xconnect.net> wrote:

> 
> More on my config:  This is a 32-bit system that had installed at
> some point Checkpoint VPN, Netscreen Remote and 2 different versions
> of Shrew on it. Most likely my issue was related to those old
> installs?
> 
> I am now back to my original issue however - unable to connect to
> multiple VPN's simultaneously - even with 2.1.7.
> 
> Any more ideas?
> 

Hi Christina,

Do you by any chance have overlapping destination subnets?  Or maybe
one of the VPNs is set to tunnel all?

Regarding the previous VPN clients, I know that Shrew and
NetScreen-Remote do not co-exist well - check to make sure that you do
not have the Deterministic Network Enhancer installed in the network
adapter properties.

_______________________________________________
vpn-help mailing list
vpn-help at lists.shrew.net
http://lists.shrew.net/mailman/listinfo/vpn-help