[vpn-help] vpn 2.1.7. on Win7-64bit only works on fresh install after reboot no return ike message is received

[Roving Gecko]

Hi,

I have installed version 2.1.7 on windows 7 64-bit.
Right after the install, before I reboot the laptop, the application works just 
fine and allows me to connect to a cisco pix gateway.

However, as soon as I reboot my laptop the application stops functioning.
I get a 'negotiation timout occurred' in the client.

When I log the application right after install and after reboot I get:
working:
.....
11/01/12 14:04:33 ii : local is CISCO UNITY compatible
11/01/12 14:04:33 >= : cookies a1b7d4270fcba1c0:0000000000000000
11/01/12 14:04:33 >= : message 00000000
11/01/12 14:04:33 -> : send IKE packet MYIPADDRESS:500 -> GATEWAYIPADDRESS:500 ( 
1159 bytes )
11/01/12 14:04:33 DB : phase1 resend event scheduled ( ref count = 2 )
11/01/12 14:04:33 <- : recv IKE packet GATEWAYIPADDRESS:500 -> MYIPADDRESS:500 ( 
424 bytes )
.....

After reboot, no longer working:
....
11/01/12 13:56:15 ii : local is CISCO UNITY compatible
11/01/12 13:56:15 >= : cookies 4056686d279b9020:0000000000000000
11/01/12 13:56:15 >= : message 00000000
11/01/12 13:56:15 -> : send IKE packet MYIPADDRESS:500 -> GATEWAYIPADDRESS:500 ( 
1159 bytes )
11/01/12 13:56:15 DB : phase1 resend event scheduled ( ref count = 2 )
11/01/12 13:56:20 -> : resend 1 phase1 packet(s) MYIPADDRESS:500 -> 
GATEWAYIPADDRESS:500
11/01/12 13:56:25 -> : resend 1 phase1 packet(s) MYIPADDRESS:500 -> 
GATEWAYIPADDRESS:500
11/01/12 13:56:30 -> : resend 1 phase1 packet(s) MYIPADDRESS:500 -> 
GATEWAYIPADDRESS:500
11/01/12 13:56:35 ii : resend limit exceeded for phase1 exchange
11/01/12 13:56:35 ii : phase1 removal before expire time
11/01/12 13:56:35 DB : phase1 deleted ( obj count = 0 )
11/01/12 13:56:35 DB : policy not found
11/01/12 13:56:35 DB : policy not found
11/01/12 13:56:35 DB : policy not found
11/01/12 13:56:35 DB : policy not found
11/01/12 13:56:35 DB : tunnel stats event canceled ( ref count = 1 )
11/01/12 13:56:35 DB : removing tunnel config references
11/01/12 13:56:35 DB : removing tunnel phase2 references
11/01/12 13:56:35 DB : removing tunnel phase1 references
11/01/12 13:56:35 DB : tunnel deleted ( obj count = 0 )
11/01/12 13:56:35 DB : removing all peer tunnel refrences
11/01/12 13:56:35 DB : peer deleted ( obj count = 0 )
11/01/12 13:56:35 ii : ipc client process thread exit ...

(I replaced the actual ip addresses in above logs.)

Any suggestions? I've reinstalled it a couple times, went through all the 
suggested extra cleanup before a new install, disabled all firewalls, etc. 
Searched the mailing list. All to no avail.

Thanks,

Bas


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20110112/a2bdb3e2/attachment-0001.html>