[vpn-help] SRX5308 config?

[Gregg Lahti]

The casestudy.com VPN website had a great setup, found that the casestudy #127 worked.  I could not get the example off the shrewsoft site to work at all.

I'm using a Windows 7 box to connect to the VPN.  I now have a tunnel and I can ping my server and do a successful nslookup.  Netstat says it's routing fine.  However, I can't mount a share drive (SMB) from the linux RHEL5 box.  I can do this normally inside the network without issue.

Any ideas on how to resolve this in the VPN client-side?

-Thanks
-Gregg

CTO, Serious Integrated, Inc
480-330-3159
http://www.seriousintegrated.com<http://www.seriousintegrated.com/>

From: vpn-help-bounces at lists.shrew.net [mailto:vpn-help-bounces at lists.shrew.net] On Behalf Of Gregg Lahti
Sent: Monday, July 18, 2011 10:34 PM
To: vpn-help at lists.shrew.net
Subject: [vpn-help] SRX5308 config?

Not having any luck configuring a client with a SRX5308.  Used the example for the FVS33x/FVX53x and got failure.  Per a previous email thread I changed the client to ike config push on the General tab and got it to connect and get a tunnel enabled but no traffic is running through the tunnel.

Anyone have an idea on how to debug this and get a reliable connection or have an example that works?

-Thanks
-Gregg

CTO, Serious Integrated, Inc
480-330-3159
http://www.seriousintegrated.com<http://www.seriousintegrated.com/>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20110720/7772e01f/attachment-0001.html>