[vpn-help] SRX5308 config?

[Gregg Lahti]

Figured it out, didn't have the hosts file setup correctly in the windows directory.  We are still working on setting up a DNS/LDAP solution and using a hosts file as an intermediate solution.  The default MTU worked fine.

-Thanks
-Gregg

CTO, Serious Integrated, Inc
480-330-3159
http://www.seriousintegrated.com<http://www.seriousintegrated.com/>

From: prolag at gmail.com [mailto:prolag at gmail.com] On Behalf Of Alexis La Goutte
Sent: Friday, July 22, 2011 1:58 PM
To: Gregg Lahti
Cc: vpn-help at lists.shrew.net
Subject: Re: [vpn-help] SRX5308 config?

Hi Gregg,

Have you tried to change the MTU in Shrew?

Regards,

On Thu, Jul 21, 2011 at 6:12 AM, Gregg Lahti <gregg.lahti at seriousintegrated.com<mailto:gregg.lahti at seriousintegrated.com>> wrote:
The casestudy.com<http://casestudy.com> VPN website had a great setup, found that the casestudy #127 worked.  I could not get the example off the shrewsoft site to work at all.

I'm using a Windows 7 box to connect to the VPN.  I now have a tunnel and I can ping my server and do a successful nslookup.  Netstat says it's routing fine.  However, I can't mount a share drive (SMB) from the linux RHEL5 box.  I can do this normally inside the network without issue.

Any ideas on how to resolve this in the VPN client-side?

-Thanks
-Gregg

CTO, Serious Integrated, Inc
480-330-3159<tel:480-330-3159>
http://www.seriousintegrated.com<http://www.seriousintegrated.com/>

From: vpn-help-bounces at lists.shrew.net<mailto:vpn-help-bounces at lists.shrew.net> [mailto:vpn-help-bounces at lists.shrew.net<mailto:vpn-help-bounces at lists.shrew.net>] On Behalf Of Gregg Lahti
Sent: Monday, July 18, 2011 10:34 PM
To: vpn-help at lists.shrew.net<mailto:vpn-help at lists.shrew.net>
Subject: [vpn-help] SRX5308 config?

Not having any luck configuring a client with a SRX5308.  Used the example for the FVS33x/FVX53x and got failure.  Per a previous email thread I changed the client to ike config push on the General tab and got it to connect and get a tunnel enabled but no traffic is running through the tunnel.

Anyone have an idea on how to debug this and get a reliable connection or have an example that works?

-Thanks
-Gregg

CTO, Serious Integrated, Inc
480-330-3159<tel:480-330-3159>
http://www.seriousintegrated.com<http://www.seriousintegrated.com/>


_______________________________________________
vpn-help mailing list
vpn-help at lists.shrew.net<mailto:vpn-help at lists.shrew.net>
http://lists.shrew.net/mailman/listinfo/vpn-help

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20110726/6e2179de/attachment-0002.html>