[vpn-help] Inappropriate DNS changing in Win7

[Stanislav Datskevich]

14.05.2011 13:11, Christian Krackowizer:
> Use 'virtual adapter' instead of 'existing ...' this solved it once for me
>
> mit freundlichen Grüßen
>
> Christian Krackowizer
> Josef-Thorak-Strasse 22
> 5026 Salzburg
> Tel. +43-664-3760631
> c.krackowizer at a1.net
>
>
>> -----Ursprüngliche Nachricht-----
>> Von: vpn-help-bounces at lists.shrew.net [mailto:vpn-help-
>> bounces at lists.shrew.net] Im Auftrag von Stanislav Datskevich
>> Gesendet: Donnerstag, 12. Mai 2011 20:31
>> An: vpn-help at lists.shrew.net
>> Betreff: [vpn-help] Inappropriate DNS changing in Win7
>>
>> Problem:
>> I'm using ShrewSoft VPN Client version 2.1.7 in Windows 7 to connect to
>> Juniper SRX 210 firewall. The connection is successfully, but vpn client
>> erases all the DNS-servers in my existing network connection.
>> DNS-servers are turned back when I disconnect vpn. Now I using a
>> workaround - I added my DNS-servers manually to vpn config.
>>
>> I propose to change the VPN client so that it does not interfere in
>> setting DNS, if you uncheck "Enable DNS ".
>>
>> To reproduce:
>> Connect from Windows 7 (use manually added DNS-servers on your network
>> connection) to any Juniper SRX with dial-in vpn using attached config
>> (or same).
>>
>> VPN Client version = 2.1.7
>> Windows OS Version = Windows 7 32-bit with service pack 1
>> Gateway Make/Model = Juniper SRX 210
>>
>> --
>> My ICQ: 6693942
>> My Jabber: phantasm at jabber.ru
>
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> http://lists.shrew.net/mailman/listinfo/vpn-help
Unfortunately, it's impossible with Juniper SRX for me.. I tried to 
experiment with Juniper config and virtual adapters, but it not succeeded.
If you have working config for Shrew VPN and Juniper SRX, I'll be very 
thankful :)

-- 
My ICQ: 6693942
My Jabber: phantasm at jabber.ru