[vpn-help] Connecting to Watchguard from Linux v2.1.7

[gregmail at outtacyte.com]

Yes, the Shrew client does work with XTM on firewall.

Make sure the XTM is the latest version because the prior versions had a
problem generating the .vpn file

Use the XTM UI to generate the .vpn file (or, you can use the WSM if you
have that installed)

I have it working at two of my locations.

-Greg

-----Original Message-----
From: tom+shrew at falkensweb.com [mailto:tom+shrew at falkensweb.com] 
Sent: Wednesday, March 21, 2012 2:35 PM
To: vpn-help at lists.shrew.net
Subject: [vpn-help] Connecting to Watchguard from Linux v2.1.7

I'm using the above version of the Linux client to connect a Watchguard
client. 
I got it from the main Ubuntu repository.

However, when ever I try to connect, the log window says:

config loaded for site 'work-vpn.vpn'
attached to key daemon ...
peer configured
iskamp proposal configured
esp proposal configured
client configured
local id configured
remote id configured
pre-shared key configured
bringing up tunnel ...
negotiation timout occurred
tunnel disabled
detached from key daemon ...

and then disconnects.

I've tried disabled my local firewall, and even placing my local machine in
my ADSL reuters DMZ, to no avail.

Is the Shrew client know to work with a Watchguard device ?
--
Tom
Computers are Lego for grown ups.

_______________________________________________
vpn-help mailing list
vpn-help at lists.shrew.net
http://lists.shrew.net/mailman/listinfo/vpn-help