[vpn-help] Shrewsoft and Watchguard

[Giuseppe Gammariello]

Hello all,

I am using Shrewsoft 2.1.7 to connect to a very old and outdated Watchguard Firewall; running WatchGuard SOHO 6 TC.  I am able to connect to the WG successfully and from what I can tell, successfully establish phase 1 and phase 2 authentications.  All works fine for about 10-15 minutes, then I can no longer pass traffic.  Shrewsoft still says the tunnel is enabled, but no pings are returned.  I have the WatchGuard VPN software working on a Windows XP machine without issue and that stays connected all the time, however I can't get WatchGuard and Shrewsoft to work together.  I have attached some logs.  I have changed the external ip to 2.2.2.2 in the log files.  The local site has a 192.168.1.0 network and the remote site has a 192.168.7.0 network.

I did a running ping and pings stop getting replies at the 22:37:39.482 mark in the log files.

Any help would be greatly appreciated.

Thank you,
Giuseppe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20120504/32fcf88e/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: iked.log
Type: application/octet-stream
Size: 135026 bytes
Desc: iked.log
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20120504/32fcf88e/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ipsec.log
Type: application/octet-stream
Size: 2696214 bytes
Desc: ipsec.log
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20120504/32fcf88e/attachment-0003.obj>