[vpn-help] adapter configuration failed (Win7-64)

[Kevin VPN]

On 09/25/2012 03:42 PM, Mark Ruys wrote:
> I try to get the VPN client to work, but it fails to configure the
> adapter. This is the log I get:
>      config loaded for site 'PeerCode'
>      attached to key daemon ...
>      peer configured
>      iskamp proposal configured
>      esp proposal configured
>      client configured
>      local id configured
>      remote id configured
>      pre-shared key configured
>      bringing up tunnel ...
>      adapter configuration failed
>      tunnel disabled
>      detached from key daemon
>
> I do see the "Shrew Soft Virtual Adapter" in my list of devices,
> although it is disabled. Somewhere I read that's fine.
>
> I tried both 2.2.0 beta 2, as 2.1.7. Windows 7 Professional 64 bit.
>
> So how to get this working? Anyone experiences the same problem?
>


Hi Mark,

If you're still having the problem, can you generate a log report using 
the Trace Utility?  We can hopefully use that to help you.

Here's the instructions.  Remember to increase the Log output level.
http://www.shrew.net/support/wiki/BugReportVpnWindows