[vpn-help] Tunneled in but can't access server

[Thor Carlson]

No luck.  Policy Generation Level was initially set to auto, per the configuration instructions.  Available choices were auto, unique, require, shared.  All fail in the same fashion.  On the Network tab, Security Associations, Established - 0, Expired - 0, Failed - 2

Thanks for the response, what else can I check?

Thor

-----Original Message-----
From: Alexis La Goutte [mailto:alexis.lagoutte at gmail.com]
Sent: Tuesday, March 26, 2013 07:59 AM
To: Thor at thorcomputing.net
Cc: vpn-help at lists.shrew.net
Subject: Re: [vpn-help] Tunneled in but can't access server

Hi,

Please check the Policy Generation Level, must be set unique or require
(not auto)

Regards,

On Mon, Mar 25, 2013 at 4:23 PM, Thor Carlson <thor at thorcomputing.net>wrote:

> I'm having the same issue with my Netgear VPN Firewall.  After you have
> established your tunnel, in the VPN connect window, will you please click
> the Network tab and look at Security Associations?  I only get Failed,
> never Established or Expired.
>
> Thor
>
>
> -----Original Message-----
> From: Jansen, Tina [mailto:tjansen at nwciowa.edu]
> Sent: Tuesday, March 19, 2013 02:44 PM
> To: vpn-help at lists.shrew.net
> Subject: [vpn-help] Tunneled in but can't access server
>
> Trying to set up a VPN with the shrew software. Client side is using
> windows 7. Server side is using Server 2008. FVS NETGEAR VPN/Firewall
> router.  Have no problems tunneling in. Says tunnel connected. However, I
> cannot access the server or ping the server. Any ideas what I am missing
> here?
>
> Thank you
> Tina
>
>
>
>
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> https://lists.shrew.net/mailman/listinfo/vpn-help
>