[vpn-help] Tunneled in but can't access server
Rodney Barnett
barnett at ploughman-analytics.com
Thu Mar 28 08:18:55 CDT 2013
Are there any subnet or routing clashes? Both sides need to route packets
into the tunnel.
Rodney
-----Original Message-----
From: vpn-help-bounces at lists.shrew.net
[mailto:vpn-help-bounces at lists.shrew.net] On Behalf Of Thor Carlson
Sent: Thursday, March 28, 2013 5:37 AM
To: alexis.lagoutte at gmail.com
Cc: vpn-help at lists.shrew.net
Subject: Re: [vpn-help] Tunneled in but can't access server
Yes, I exactly followed the instructions at
https://www.shrew.net/support/Howto_Netgear
-----Original Message-----
From: Alexis La Goutte [mailto:alexis.lagoutte at gmail.com]
Sent: Thursday, March 28, 2013 01:50 AM
To: Thor at thorcomputing.net
Cc: vpn-help at lists.shrew.net
Subject: Re: [vpn-help] Tunneled in but can't access server
Hi,
You use ModeConfig in your NETGEAR ?
Regards,
On Thu, Mar 28, 2013 at 1:29 AM, Thor Carlson <thor at thorcomputing.net>wrote:
> No luck. Policy Generation Level was initially set to auto, per the
> configuration instructions. Available choices were auto, unique,
> require, shared. All fail in the same fashion. On the Network tab,
> Security Associations, Established - 0, Expired - 0, Failed - 2
>
> Thanks for the response, what else can I check?
>
> Thor
>
> -----Original Message-----
> From: Alexis La Goutte [mailto:alexis.lagoutte at gmail.com]
> Sent: Tuesday, March 26, 2013 07:59 AM
> To: Thor at thorcomputing.net
> Cc: vpn-help at lists.shrew.net
> Subject: Re: [vpn-help] Tunneled in but can't access server
>
> Hi,
>
> Please check the Policy Generation Level, must be set unique or
> require (not auto)
>
> Regards,
>
> On Mon, Mar 25, 2013 at 4:23 PM, Thor Carlson <thor at thorcomputing.net
> >wrote:
>
> > I'm having the same issue with my Netgear VPN Firewall. After you
> > have established your tunnel, in the VPN connect window, will you
> > please click the Network tab and look at Security Associations? I
> > only get Failed, never Established or Expired.
> >
> > Thor
> >
> >
> > -----Original Message-----
> > From: Jansen, Tina [mailto:tjansen at nwciowa.edu]
> > Sent: Tuesday, March 19, 2013 02:44 PM
> > To: vpn-help at lists.shrew.net
> > Subject: [vpn-help] Tunneled in but can't access server
> >
> > Trying to set up a VPN with the shrew software. Client side is using
> > windows 7. Server side is using Server 2008. FVS NETGEAR
> > VPN/Firewall router. Have no problems tunneling in. Says tunnel
> > connected. However, I cannot access the server or ping the server.
> > Any ideas what I am missing here?
> >
> > Thank you
> > Tina
> >
> >
> >
> >
> > _______________________________________________
> > vpn-help mailing list
> > vpn-help at lists.shrew.net
> > https://lists.shrew.net/mailman/listinfo/vpn-help
> >
>
>
>
_______________________________________________
vpn-help mailing list
vpn-help at lists.shrew.net
https://lists.shrew.net/mailman/listinfo/vpn-help
More information about the vpn-help
mailing list