[vpn-help] Antwort: Re: HTTP request through IPSec tunnel fails

[Manfred Horwath]

...any ideas, what the problem could be??

Mit freundlichen Grüßen / With best regards

Manfred Horwath, Ing 
Senior Engineer
Software Realtime Systems /DRXP (PLC)

KNAPP AG
Guenter-Knapp-Str. 5-7 
8075 Hart bei Graz, Austria 
Phone: +43 5 04952-1866
Mobile: +43 676 8979 1866
Fax: +43 5 0495299-1866
manfred.horwath at knapp.com 
www.knapp.com 

Commercial register number: FN 168434y 
Commercial register court: Graz 
DVR: 0384861

The information in this e-mail (including any attachment) is confidential 
and intended to be for the use of the addressee(s) only. If you have 
received the e-mail by mistake, any disclosure, copy, distribution or use 
of the contents of the e-mail is prohibited, and you must delete the 
e-mail from your system. As e-mail can be changed electronically KNAPP 
assumes no responsibility for any alteration to this e-mail or its 
attachments. KNAPP has taken every reasonable precaution to ensure that 
any attachment to this e-mail has been swept for virus. However, KNAPP 
does not accept any liability for damage sustained as a result of such 
attachment being virus infected and strongly recommend that you carry out 
your own virus check before opening any attachment.



Von:    Alexis La Goutte <alexis.lagoutte at gmail.com>
An:     Manfred Horwath <Manfred.Horwath at knapp.com>, 
Kopie:  "vpn-help at lists.shrew.net" <vpn-help at lists.shrew.net>
Datum:  18.11.2015 15:53
Betreff:        Re: [vpn-help] HTTP request through IPSec tunnel fails
Gesendet von:   prolag at gmail.com



Hi,

No, there is no limitation with Shrew.

Regards,

On Wed, Nov 18, 2015 at 2:18 PM, Manfred Horwath <
Manfred.Horwath at knapp.com> wrote:
Hi, 

i'm using the ShrewSoft Client to connect to a Siemens PLC Gateway 
(CP343-1 Advanced). 
The connection is established ok and i'm able to ping all nodes through 
IPSec tunnel. 
I'm also able to open a website of one node, but not from a different 
node! I do not experience this problem with another IPSec Client Software 
(NCP Security Client), which i've tested (but this client causes another 
problem!). 
Does anyone no, if the standard ShrewSoft Client is limited in any way or 
could it be a simple configuration fault? 

VPN Client Version = Standard Edition Version 2.2.2
Windows OS Version = Windows7 Enterprise SP1 64 Bit
Gateway Make/Model = Siemens CP343-1 Advanced
Gateway OS Version = 3.0




Mit freundlichen Grüßen / With best regards

Manfred Horwath, Ing 
Senior Engineer
Software Realtime Systems /DRXP (PLC)

KNAPP AG
Guenter-Knapp-Str. 5-7 
8075 Hart bei Graz, Austria 
Phone: +43 5 04952-1866
Mobile: +43 676 8979 1866
Fax: +43 5 0495299-1866
manfred.horwath at knapp.com 
www.knapp.com 

Commercial register number: FN 168434y 
Commercial register court: Graz 
DVR: 0384861

The information in this e-mail (including any attachment) is confidential 
and intended to be for the use of the addressee(s) only. If you have 
received the e-mail by mistake, any disclosure, copy, distribution or use 
of the contents of the e-mail is prohibited, and you must delete the 
e-mail from your system. As e-mail can be changed electronically KNAPP 
assumes no responsibility for any alteration to this e-mail or its 
attachments. KNAPP has taken every reasonable precaution to ensure that 
any attachment to this e-mail has been swept for virus. However, KNAPP 
does not accept any liability for damage sustained as a result of such 
attachment being virus infected and strongly recommend that you carry out 
your own virus check before opening any attachment.
_______________________________________________
vpn-help mailing list
vpn-help at lists.shrew.net
https://lists.shrew.net/mailman/listinfo/vpn-help


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20151123/3eba64f8/attachment.html>