[vpn-help] Detached from key daemon

[Claudio Appendino]

Hi,
the log level is set to "loud". As I wrote in the previous email I have two
PCs and on one of these the vpn works. So I have collected the logs on both
and I have compared with Notepad++. The first 300 lines are equals then the
logs change and here the differences:

ON NON-WORKING PC:

 DB : config ref decrement ( ref count = 0, obj count = 1 )
 DB : phase1 ref decrement ( ref count = 3, obj count = 1 )
 ii : enabled adapter ROOT\VNET\0000
 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
 ii : adapter ROOT\VNET\0000 unavailable, retrying ...

ON WORKING PC:

 DB : config ref decrement ( ref count = 0, obj count = 1 )
 DB : phase1 ref decrement ( ref count = 3, obj count = 1 )
 ii : enabled adapter ROOT\VNET\0000
 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
 ii : apapter ROOT\VNET\0000 MTU is 1380
 ii : generating IPSEC security policies at REQUIRE level
 ii : creating NONE INBOUND policy ANY:<REMOTE-IP>:* -> ANY:<MY-IP>:*

So the problem seems to be with ROOT\VNET\0000 but what is this and what
can I check?

Thanks
C




Il giorno dom 22 lug 2018 alle ore 12:25 Alexis La Goutte <
alexis.lagoutte at gmail.com> ha scritto:

> Hi Claudio,
>
> Try to enable more debug
> What the VPN Gateway ? do you have check log too ?
>
>
> Cheers
>
> On Fri, Jul 20, 2018 at 5:45 PM Claudio Appendino <cldppn at gmail.com>
> wrote:
>
>> Hi all,
>> I can't connect with the Shrew client installed on a windows 7 machine
>> with an admin profile. On a windows 10 pc works perfectly. These are the
>> messages:
>>
>> attached to key daemon ...
>> peer configured
>> iskamp proposal configured
>> esp proposal configured
>> client configured
>> local id configured
>> remote id configured
>> pre-shared key configured
>> bringing up tunnel ...
>> network device configured
>> tunnel enabled
>> session terminated by gateway
>> tunnel disabled
>> detached from key daemon
>>
>> This is the log that is major repeated:
>>
>> 18/07/20 15:52:10 DB : phase1 found
>> 18/07/20 15:52:10 DB : phase1 ref increment ( ref count = 4, obj count =
>> 1 )
>> 18/07/20 15:52:10 ii : processing config packet ( 220 bytes )
>> 18/07/20 15:52:10 DB : config found
>> 18/07/20 15:52:10 DB : config ref increment ( ref count = 1, obj count =
>> 1 )
>> 18/07/20 15:52:10 !! : config packet ignored ( config already mature )
>> 18/07/20 15:52:10 DB : config ref decrement ( ref count = 0, obj count =
>> 1 )
>> 18/07/20 15:52:10 DB : phase1 ref decrement ( ref count = 3, obj count =
>> 1 )
>> 18/07/20 15:52:10 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
>> 18/07/20 15:52:11 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
>> 18/07/20 15:52:12 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
>> 18/07/20 15:52:13 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
>> 18/07/20 15:52:14 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
>> 18/07/20 15:52:15 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
>> 18/07/20 15:52:16 ii : adapter ROOT\VNET\0000 unavailable, retrying ...
>> 18/07/20 15:52:17 DB : phase1 found
>> 18/07/20 15:52:17 DB : phase1 ref increment ( ref count = 4, obj count =
>> 1 )
>>
>>
>> Thanks,
>> C
>>
>> _______________________________________________
>> vpn-help mailing list
>> vpn-help at lists.shrew.net
>> https://lists.shrew.net/mailman/listinfo/vpn-help
>>
> _______________________________________________
> vpn-help mailing list
> vpn-help at lists.shrew.net
> https://lists.shrew.net/mailman/listinfo/vpn-help
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20180820/f06379ef/attachment.html>