[vpn-help] Win10 RemoteDesktop App cannot connect through ShrewVPN

[Yury Kolos]

Hello, Peter

I know that 192.168.111.250 is LAN IP of my remote server (in office
network). I use ShrewVPN from my home.
I have a lot of RDP servers and I don't want to port forward they all. That
why I need VPN solution.

I guess you had not understood this issue.

See below:

> "ShewVPN" + "Remote Desktop App" + "LAN IP of remote RDP-server" = *ISSUE*
> (cannot connect).
> "ShewVPN" + "RDP-client (mstsc)" + "LAN IP of remote RDP-server" = * OK*.
>
> "Remote Desktop App" + "WAN IP of remote RDP-server" = * OK*.
> "RDP-client (mstsc)" + "WAN IP of remote RDP-server" = * OK*.
>

Classic RDP client (mstsc) and Remote Desktop app use the same TCP port
3389.
When I try Remote Desktop App through ShrewVPN I don't see any attempts on
my Cisco PIX debug logs. Classic RDP client does footsteps in Cisco logs.

I hope you can make conclusion from information above issue in ShrewVPN
software.
Debug logs: https://blancos.info/debug.zip <https://blancos.info/debug.zip>

Thank you for your response!


--
Best regards, Yury

2018-06-17 1:33 GMT+03:00 Peter Steiner <petersteiner at dominioncomputer.com>:

> That is a LAN IP  not WAN IP.
>
> check firewall forwarding rule if trying wan ip
>
> be sure outside port on firewall is forwarded to internal port for your ip
>
> recommend using a high port number  on wan facing side of router like
> 63389 then route to 3389 of lan ip
>
> remember cisco u create a rule for service ports than the forwarding rule
>
> u dont need vpn on LAN in majority of cases
>
> hth
>
> V/R,
> ~Peter
>
>
> -----Original Message-----
> From: Yury Kolos <y.whitest at gmail.com>
> To: vpn-help at lists.shrew.net
> Sent: Sat, 16 Jun 2018 11:03 AM
> Subject: [vpn-help] Win10 RemoteDesktop App cannot connect through ShrewVPN
>
> Hello, it's very strange issue.
>
> I cannot use new Remote Desktop App in Windows 10 for connecting to remote
> servers when Shrew Soft VPN is active.
>
>
> In the same time I can use classic RDP-client (mstsc) without problems.
>
>> telnet 192.168.111.250 3389
>>
> works as well.
>
> When I try to use Remote Desktop App  for connecting to remote servers
> without VPN (to NATed public address of the same RDP-server) everything
> working fine.
>
> *My environment*:
>
>> VPN Client Version = 2.2.2
>> Windows OS Version = Windows 10 1803 64-bit
>> Gateway Make/Model = Cisco PIX 515
>> Gateway OS Version = 8.0.4(28)
>>
>> Remote Desktop App = 10.1.1042.0.
>> RDP-server private IP: 192.168.111.250
>>
>
> I can send debug files if needed.
>
> Could you please help me to fix the issue?
>
> --
> Best regards, Yury
> Skype: y.kazakevich
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20180617/675cb4d6/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ???????????.png
Type: image/png
Size: 18047 bytes
Desc: not available
URL: <https://lists.shrew.net/pipermail/vpn-help/attachments/20180617/675cb4d6/attachment-0001.png>