Hi all,<br><br>Firstly, sorry if i shouldn't be posting  to this list, or in this manner. I am a first timer. <br><br>My problem is this: I try to connect a vpn connection using: <br><br>shrew soft ike client, version 2.0.3, built for Linux. <br>

OS: Ubuntu Linux 8.04 (Hardy)<br>This client (and daemon process) was installed via the ubuntu repositories for this version of Ubuntu, using apt. <br><br>The result I get is this:<br><br>config loaded for site 'sean@astraia.com.new.vpn'<br>

attached to key daemon ...<br>peer configured<br>iskamp proposal configured<br>esp proposal configured<br>ipcomp proposal configured<br>client configured<br>local id configured<br>remote id configured<br>pre-shared key configured<br>

bringing up tunnel ...<br>virtual network device configured<br>virtual network device enabled<br>tunnel enabled<br><span style="color: rgb(255, 0, 0);">gateway not responding</span><br>tunnel disabled<br>detached from key daemon ...<br>

<br>I know that the key that I am using is correct<br>(i.e., the key used in    Authentication->Credentials->Pre-shared key)<br>because when I use a wrong key I get a 'peer authentication error'. <br>I also made sure that the ip address range that my home intranet is within (192.168.2.1) is not the same as the work intranet (which is 192.168.1.1). So that shouldn't be the problem. <br>
<br>I am however only using the default daemon configuration file. <br>Is there something else I should setup (do) before i can expect this to work on linux?<br>The strange thing is that around march or so last year, I had it working. I had been using Ubuntu 7.10 (Gutsy) and installed shrew soft from the Hardy repositories, and it 'just worked'.  I didn't need to do anything. It simply worked. <br>
Since i've installed Hardy fresh.... it doesn't work. <br>I see this on the two computers that I've installed Ubuntu Hardy on. <br><br>Anyone got any ideas?<br><br>Kind Regards, <br><br>Sean van Buggenum<br><br>
<br><br><br><br><br><br>