Update:<br><br>Am connecting now, (by setting auto config to disabled and putting in my own settings)<br>tunnel gets established, but cannot send any information through the tunnel, pings/telnet/ect. bounce.<br><br>trace keeps spitting out:<br>
==>local ip address==> --> ==>WAN address<== resend 1 phase2packet<br><br>then after 3 retries:<br>resend limit exceeded for phase2 exchange<br><br>I've tried auto, and the combination of settings in the router for the phase2 tab, also enabled/disabled pfs and compression, no dice.<br>
<br>ideas? <br>