<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;">On Mon May 16 13:07:25 CDT 2011 Matthew Grooms wrote:<br><br><pre>>It works in my lab with the settings in the wiki document. I believe<br>>some folks on the list have stated there is a problem when modecfg is<br>>not used. I have yet to verify this. You should definitely upgrade your<br>>router to the latest available firmware. The stock firmware on some<br>>devices just won't work.<br><br>They are using the latest firmware for the FVS328, which is V1.0.15 and<br>dated 12 July 2005.  So what you refer to is unavailable for this hardware.<br>I have no control over the hardware as it belongs to a client and they have<br>no plans to replace working hardware.<br><br></pre>As I noted in my original message I am able to complete the initial phase with the 2.1.7<br>client but I am unable to open the tunnel.  The NetGear client works fine with this
 router,<br>so if that client were Windows 7 compatible I would not even bother to consider changing<br>clients.  But as it is NOT compatible and they insist on charging to upgrade it I am looking<br>for an alternative.  Your client appears to be my best hope.  Any help appreciated.<br><br>Dave<br></td></tr></table>