<div dir="ltr">So here's a weird problem...<div><br></div><div>I have Shrew 2.2.2 (x64) installed.  Prior to upgrading to Windows 10, everything worked.</div><div><br></div><div>After upgrading to Windows 10, Outlook 2010 will no longer connect to the Exchange server.  It's worth noting that I have to be on VPN to connect to Exchange.  No outside access is allowed.  Outlook Web Access also does not work, so it seems to be a routing issue, and not an Outlook issue.</div><div><br></div><div>When I connect using the Cisco Anyconnect client, Outlook 2010 works.  OWA works too.</div><div><br></div><div>I tried 2 different configurations in Shrew.  In one of them, I had it obtain the topology from the server and tunnel everything.  In the other config, I copied the routing information that was displayed in Anyconnect.  That tunneled everything but excluded my 192.* network and one other network.  The behavior was the same in both cases.</div><div><br></div><div>I can access internal web pages while on the VPN, so the connection is definitely established and some things are being routed.</div><div><br></div><div>Has anyone else run into this, or know what might be happening?  I tried reinstalling Shrew 2.2.2.  I also tried the instructions at <a href="http://www.ruudborst.nl/shrewsoft-vpn-filter-blocks-traffic-on-windows-10/">http://www.ruudborst.nl/shrewsoft-vpn-filter-blocks-traffic-on-windows-10/</a>  but it didn't help.</div><div><br></div><div>Any help is appreciated!  Thanks!!</div></div>