[vpn-help] -12 against ipsec-tools 0.6.6

Matthew Grooms mgrooms at shrew.net
Thu Aug 10 13:41:51 CDT 2006


Brian Jones wrote:
> With the same test, doing "route add 0.0.0.0 mask 0.0.0.0 10.1.202.2 metric
> 20" on windows sent all my packets over the tunnel.
> 
> With the Cisco client it adds this route by default:
> Network Destination        Netmask          Gateway       Interface  Metric
>  0.0.0.0          0.0.0.0       10.1.202.2      10.1.202.2       1
> 
> 
> 

Peter,

	After seeing your route table, its pretty obvious the route management 
code has some serious issues. The good news is that I have rewritten 
this code but hadn't yet decided whether or not to merged it into the 
1.0 branch. I would be very grateful if you could help me test it out.

	Here is a new package based of the 1.1 branch. It contains a few new 
things like updated route management code, DPD support and Split DNS 
support.

http://www.shrew.net/vpn/vpn-client-1.1-alpha-1.exe

	Could your please reboot the machine to clear out the route table and 
try this new package out. It would be helpful if you could keep an eye 
on the route table before and after connecting and then after disconnect 
to make sure things look sane. If this is an improvement for you, I will 
merge the new route table code into 1.0 for the next RC.

Thanks,

-Matthew



More information about the vpn-help mailing list