[vpn-help] Problem with configuring client settings

[Kimmo Koivisto]

Hello

I installed beta 1 to the XP SP2, no problems during installation, accepted 
driver installation when windows asked it.

After installation, I configured one connection but when I try to connect, GUI 
says:
<message>
config loaded for site 1.2.3.4
configuring client settings ...
</message>

and nothing happens. I enabled loglevel 3 but cannot see anything, it probably 
never gets to the IKE. I cannot see any virtual adapters in Windows Network 
Connection, is this like it should be?

I also would like to have IKE phase 1 and Phase 2 lifetimes in kbytes, GUI 
won't let me set those but can I do it to the registry?

Any ideas?

Regards
Kimmo Koivisto

<configuration>
[HKEY_CURRENT_USER\Software\ShrewSoft\vpn\site\1.2.3.4]
"network-ike-port"=dword:000001f4
"network-frag-enable"=dword:00000000
"network-frag-size"=dword:0000021c
"network-natt-port"=dword:00001194
"network-natt-rate"=dword:0000001e
"client-addr-auto"=dword:00000000
"client-dns-auto"=dword:00000000
"client-wins-auto"=dword:00000001
"phase1-dhgroup"=dword:00000002
"phase1-keylen"=dword:00000080
"phase1-life-secs"=dword:00001644
"phase1-life-kbytes"=dword:00000000
"phase2-keylen"=dword:00000080
"phase2-pfsgroup"=dword:00000002
"phase2-life-secs"=dword:00000e10
"phase2-life-kbytes"=dword:00000000
"policy-list-auto"=dword:00000000
"network-host"="1.2.3.4"
"network-natt-enable"="enable"
"client-ip-addr"="10.10.10.10"
"client-ip-mask"="255.255.255.0"
"client-dns-addr"="5.6.7.8"
"auth-method"="mutual-rsa"
"ident-client-type"="asn1dn"
"ident-server-type"="asn1dn"
"auth-server-cert"="ca.pem"
"auth-client-cert"="cert.pem"
"auth-client-key"="key.pem"
"phase1-exchange"="main"
"phase1-cipher"="blowfish"
"phase1-hash"="md5"
"phase2-transform"="esp-blowfish"
"phase2-hmac"="md5"
"phase2-compress"="none"
"policy-entry-network"="192.168.100.0 / 255.255.255.0"
</configuration>